1.  Switch the Bio Medici ON using switch No.8
(press down top end of toggle switch).
The control light does not flash!

2.  Set the selected switch or combination of switches
according to the table for the symptom(s) you wish to treat.
The light will now flash slowly or rapidly, blinking rythme of
 light depends on which setting(s) you are using.

3. Use the Bio Medici in its protective Tube
and place the device as close as possible to
the point of treatement- see the Adjustment Table.
The Bio Medici emits magnetic biological impulses
in all directions in a radius of 8 in. (20 cm).